IMER PUMPS, MIXERS & DUMPERS

IMER is known world-wide for its mixers due to its vast experience from small, portable mixers to its large batch plants. No matter how large or small the project may be, IMER has a solution to help you maximize your time and ROI. Designed to handle the most impossible of mix designs and aggregate types. The IMER Multi-Mixers, Spin Series Continuous Mixers, and Vertical Shaft mixers are ideal for efficiently and quickly mixing all types of pre-blended materials from dry pack consistency to a fluid grout. Mortar one day, stucco the next. Tackle high-strength grouts the day after, or make them all in one day without any waste. In addition, IMER Mixers are designed to work with IMER mixer/pump spray machines and grout pumps – the perfect companions for semi-automatic production

MIX 360

	MIX 360
Drum capacity	12 cu ft
Batch output*	9 cu ft
Drum diameter	38 in
Maximum aggregate size	3-8 in
Discharge outlet height: max/min	30/18 in
Pneumatic wheels	18 in
Weight: electric/gas	787/794 lbs
Electric motor rating	5 hp 220v 1ø or 3ø
Gas engine*	11 hp Honda
Width***	44 (50) in
Length***	59 (80) in
Height***	58 (56) in

THE MIX 360 OFFERS UNPARALLELED PRODUCTION AND JOBSITE / PLANT SAFETY
Vertical shaft mixers use the principles of concrete batch plant design, which allows for the paddles to rotate
through the mix rather than lift and drop it as conventional mortar mixers do. The Mix 360 vertical shaft towable
mixer easily mixes very low slump materials like dry pack mortar and refractory cement, as well as UHPC.

Tow bar makes
transport easy

4 legs adjust to
accommodate many
different positions

Honda gasoline engine,
single or 3 phase
electric motor options

9 cu ft
per batch

Dump mechanism
will discharge
according to your
needs

Torsion bar
suspension and
highway tires

Optional Accessories

OPTIONAL DUST GRATE

Take control of dust. Easily attach IMER’s iDUST® dust grates to the Mix 360 and attach a vacuum. Watch the dust be pulled downward, away from operators (Mix 360 Item# 1107494)

ACCESSORIES FOR SAFETY

The standard open grate is ideal for materials such as fireproofing.

PRODUCTION

Listening, studying, and testing have lead to drum and paddle design changes that vastly improve batch output. Why not have Mini Batch Plant (MBP) production for the cost of a mortar mixer?

INDUSTRIAL ELECTRIC MOTOR

The motors used in the MIX 360 and 750 are industrial-duty electric motors available in a wide range of voltage, single-phase or three-phase. The motors can operate continuously and easily mix stiff, dry materials

MIX 750

	MIX 750
Drum capacity	22 cu ft
Batch output*	15 cu ft
Drum diameter	52 in
Maximum aggregate size	3/8 in
Discharge outlet height: max/min	29/23 in
Pneumatic wheels	22 in
Weight: electric/gas	1588 lbs
Electric motor rating	5 hp 220v 1ø / 7.5 hp 220v 3ø
Gas engine*	13 hp Honda
Width***	63 (64) in
Length***	90 (86) in
Height***	62 (64) in

PRODUCE 18 CUBIC FEET OF MUD EVERY THREE TO FOUR MINUTES WITH THE MIX 750
The Mix 750 is the perfect partner for busy precast mixing operations, and on bridge and highway jobs. The discharge system is easy to open and
close and protected from being hit by a mud bucket or forklift. The safety grate is hinged, making access immediate. The Mix 750 is Mini-Batch
Plant production for a fraction of the cost. These mixers develop vast amounts of mixing power, far more than any horizontal shaft mortar mixer.
The ability to mix refractory mud or stiff, dry materials is unparalleled in the industry

Auto shutdown
safety grate with
integrated bag
breaker

Forklift pockets
for easy
placement

Leg jack for raising
adjusting height

Easy dump handle
to discharge load

18 cu ft of mortar
per batch

Honda gasoline, single
or 3 phase electric
motor options

Stability legs slide outward
and adjusted up or down
depending upon the desired
discharge height.

Optional Accessories

ACCESSORIES FOR SAFETY

The standard open grate is ideal for materials such as fireproofing.

PRODUCTION

Listening, studying, and testing have lead to drum and paddle design changes that vastly improve batch output. Why not have Mini Batch Plant (MBP) production for the cost of a mortar mixer?

INDUSTRIAL ELECTRIC MOTOR

KOINE 4

	KOINE 4
Power	220v/60Hz, 3 phase
Total machine power	9hp
Drive motor power	7.5 hp
Feeding impeller motor	1 hp
Water booster pump	1 hp 70 psi boost
Material flow rate	140 cu ft / h
Max. pumping distance – grouting/fireproofing*	200 ft +
Max. pumping distance – self-leveling*	300 ft +
Gearbox speed	400 rpm
Loading height	35-½ in
Dimensions	29 W x 47 L x 61-½ H in
Weight	574 lbs

DUST GRATE INCLUDED

Take control of dust. Easily attach IMER’s iDUST® dust grate and attach a vacuum, watch the dust pull downward, away from operators.

A POWERFUL, VERSATILE CONTINUOUS PUMPThe Koine 4 continuous pump is designed to provide high levels of volume and production. The Koine 4 is used almost exclusively for mixing and pumping core fill grouts, wall grouts, and self-leveling underlayments for those projects where you need tremendous production. The Koine series of pumps make your mixing and pumping automatic.

Electric motor
is thermally
protected

Forklift pockets
for easy
placement

Includes adjustable
R8 – 1.5 rotor / stator
Pressure: bar 15 (PSI 218)
Flow rate at 400 rpm: 80 l/min
(Gal/min 21)

TURBO MIXER
The turbo mixer provides increased
shear and blending of the material
before it enters the hoses

100% duty-cycle
7.5HP electric motor
with a gearbox drive
reduction system

When needed the
mixingchamber and
the compressor can
be removed quickly to
make it even easier to
move the Koine 4 from
place to place

Store all your accessories
in this handy toolbox.
Never lose pieces

Use the stainless
steel water pump
to suck from a tank
when there is no
direct water supply